Download Mac OS X Server Installation and Setup Worksheet
Transcript
Configure Manually Use this form if your network doesn’t have a DHCP server, or if you need to specify all network connection settings manually for some other reason. Network connection setting Your information Interface: N Ethernet __ N AirPort N Other: IP address: Subnet mask: Router: DNS server: Search domains (optional): IPv6 options: Use “Adjust IPv6 Options” on page 12 Ethernet options: Use “Adjust Ethernet Options” on page 12 Configure Using BootP Use this form if you want a Bootstrap Protocol server to assign an IP address and other network connection settings to your server. BootP always assigns the same IP address to a particular network port. It’s used primarily for computers that start up from a NetBoot image. Network connection setting Your information Interface: N Ethernet __ N AirPort N Other: IP address: Provided by BootP server DNS server (optional): Search domains (optional): IPv6 options: Use “Adjust IPv6 Options” on page 12 Ethernet options: Use “Adjust Ethernet Options” on page 12 Configure Lights-out Management (LOM) Use this form if your server is an Xserve with a lights-out management (LOM) interface. Network connection setting Your information for channel 1 Your information for channel 2 IP address: Subnet mask: Router: Lights-out management administrator Name: Password: 11