Download Evolis Dualys User`s guide

max.
2. Lower the spring system as shown and insert 100
magnetic cards of 0.76 mm (30mil) at most.
3. Put the feeder back in the printer. Then press on
the top of the feeder until it clicks.
Setting the Windows Driver
When first installing the Windows driver, it is necessary to parameterise the functions of the magnetic
encoder. The functions of the magnetic encoder are accessible from the Tools dialog box of the driver
by clicking the Encoding Definition button.
“Magnetic Encoder” dialog box
The Magnetic Encoder dialog box opens on
selecting the Encoding Definition button.
Track format allows us to choose the ISO standard required for each track. See the table in this
Annexe for the information concerning the ISO
7811 standards.
Coercivity parameterises the magnetic encoder in
high (HICO) or low (LOCO) coercivity. A magnetic
track encoded in high coercivity is more resistant
to exterior disturbances than a magnetic track
encoded in low coercivity.
Direct encoding allows the direct encoding of one or more magnetic tracks from this window simply
by selecting them and entering the data to be encoded. Click on the « Execute encoding » button
to start the encoding cycle.
42