Download Belling 152A Installation guide
Transcript
08 27095 00- 152A CC 14/6/04 10:59 am Page 5 INSTALLATION INSTRUCTIONS Gas Safety (Installation & Use) Regulations. mum distance of 1085mm between the cupboard units of hotplate height. This appliance must be installed by an authorised person in accordance with the manufacturers installation instructions, local gas fitting regulations, the AGA Gas Installations, the Australian Gas Installation Code AG601 /AS5601 and any other relevant statutory regulations. Particular attention should be given to relevant requirements regarding ventilation. The wall behind the cooker between the hotplate and 450mm above and across the width of the cooker, must be an incombustible material such as ceramic wall tiles. Follow the diagrams provided for guidance on fitting. Take note of all dimensions. Where this appliance is installed in Marine craft or caravans - it shall not be used as a space heater. Space for fixing The cooker can be close fitted below hotplate level. This requires a mini- 3