Download Belling 152A Installation guide

Transcript
08 27095 00- 152A CC
14/6/04
10:59 am
Page 7
INSTALLATION INSTRUCTIONS
Unpacking the cooker
l The front feet can simply be screwed
in or out to lower or raise the front of
the cooker.
Unpack the components from inside
the grill and the oven. Please make
sure that you remove everything from
inside the cavities.
Caution:
Check that the following are present:
Some soft floor coverings may get
damaged if the cooker is not moved
carefully.
l Grill pan and grid
l Pansupports (3)
l Main oven shelves (4)
l Meat pan
l Literature
l Griddle
Levelling
Two rear wheels and two front feet are
fitted which can be adjusted up or
down to set the height (900mm 915mm) and level the cooker.
l The rear wheels can be raised or
lowered from the back of cooker by
adjusting the levelling screws ‘A’ in the
plinth.
5