Download Christ ALPHA 1-2 LDplus Technical data

4.8. Initial start-up
ATTENTION! Prior to start-up, make sure that the freeze dryer has
been properly set up and installed (see section 4.1 “Site of
installation” and the following points).
4.8.1.
Functional components and control elements
Aeration valve
Drying chamber
Ø300
Ice condenser chamber
Ice condenser
Control system LSC
Mains switch
Additional interface
connection
(option, sep. accessory)
Serial interface
Vacuum pump power supply
connection
Power supply connection
of pressure control valve
and stop valve
Mains fuse
Mains cable
Name plate
Vacuum connection
Heat exchanger of refrigeration unit
28 • Installation and Commissioning of the Unit
Equipotential bonding screw for
protective ground wire check and
central ground connection
Operating Manual Freeze Dryer ALPHA 1-4 LSC / ALPHA 2-4 LSC