Download Compool Cp3800 User`s guide
Transcript
46 Settings Menu: iSx Pump Cntrl From this menu setting you can specify the IntelliFlo VS or VF pump speed (RPM, GPM) in step increments, for the assigned iS4 or iS10 button using the “Pump Incrs” or “Pump Decrs” circuit (see page 44 and 45). For example, the “Pump Incrs” and “Pump Decrs” circuit can be assigned to any two iS10 buttons. Each press of the assigned “increase” button will increase the pump speed in specific speed increments, as specified in the “iSx Pump Cntrl” menu setting. Speed increments are set from 10 to 250 RPM or 1 to 10 GPM. Assign iSx Pump Cntrl Before configuring the pump step speed, be sure to specify the IntelliFlo pump number and type in the IntelliFlo menu (“Pump #1, Pump #2,” Pump Type), see page 32. Getting There MENU ▼ SETTINGS ▼ iSx PUMP CNTRL ASSIGN IS10 & 4QT4 ▲ To assign a pump step speed: Assign iS10 & 4 Pump Controls Pump Number: 1 Step RPM: 010 Assign iS10 & 4 Pump Controls Pump Number: 1 Step GPM: 001 Up/Down buttons: Select the “Pump Number” as specified in the IntelliFlo menu (see page 32). Right buttons: Select the pump “Step” speed. Up/Down buttons: Adjust the “Step” pump speed. Settings are: - IntelliFlo VS, 10 to 250 RPM - IntelliFlo VF 1 to 10 GPM. Press the Menu button to save the settings and to return to the Settings menu options. Press the button twice to return to the main screen. Compool/EasyTouch Pool and Spa Control System Upgrade Installation and User’s Guide