Download DMP Electronics Security Command 793 Installation guide

REVISIONS
Revisions to This Document
This section explains the changes that were made to this document during this revision. This section lists the date
the change was made, the section number and section heading, and a quick summary of the change.
Date
Section Number and Heading
Quick Explanation of Changes
3/05
Section 2.1 and 5.2
Section 10.1 Class A Fire Zone Description
Back Page
Added paragraph regarding ground faults.
Clarified voltage measurement information.
Added Listings and Approvals.
4/04
Sections 3.2, 3.3, and 6.1
Sections 3.5 and 6.6
Added battery model 369.
Added keypad models 690F and 790F.
Battery Calculations Chart updated to reflect current
products, added/revised current draw information.
Section added explaining how to run multiple wires under
one terminal.
Section added explaining proper transformer installation.
Note: Subsequent numbers in the section were affected.
Note added explaining Bell Trouble on 866 Modules after
power is applied to the panel.
4.5 Terminal Wiring Connections
5.1 Installing the Transformer
5.2 Terminals 1 and 2
3/02
4.4 Wiring Keypads
6.6 XR5FC and XR5SL Power Requirements
Digital Monitoring Products
iv
Added Wiring Specifications.
Updated current draw chart.
XR5 Installation Guide