Download Pro-Form 350 Specifications
Transcript
INTRODUCTION CINCINNATI PROFORM The PROFORM is a hydraulically driven press brake. Linear transducers (potentiometers) constantly monitor the bed-to-ram position, feeding this information to the Control. The Control is a self-contained industrial PC with an integrated LCD touchscreen display, floppy disk drive, CD-ROM drive, Operator Control keyswitch and main drive START/STOP buttons. The program controls the vertical movement of the ram and movement of the backgage. After a program is entered either the machine can be run or the program stored in internal memory. The PROFORM PC Control allows an individual job to be quickly set-up and run as well as complicated, multi-bend parts or long run jobs. After a program is run, the program and related setup information can be saved for future use. PART QUALITY The following factors affect part quality: ♦ ♦ ♦ ♦ Press Brake condition and repeatability Operator ability Condition of tooling Quality of material. CINCINNATI machines are designed to be rugged and durable. However, improper adjustment or lack of maintenance can reduce the quality of parts produced on that machine. These factors may also affect the repeatability of the machine. A machine that will not consistently reverse at the same point or will drift out-of-level will not produce uniform parts. Operator ability obviously affects part quality and production rate. CINCINNATI INCORPORATED provides many design features in the machine and optional accessories to aid even the most inexperienced operator to produce consistent parts. The operator or setup person must select the best tooling from those available. The type of gaging, material supports or other special equipment will affect how the part is produced. Selecting the proper bend sequence is important to obtain quality parts and for operator safety. CINCINNATI offers both Operator and Maintenance training programs at our factory to address these problems. This training may cover subjects from the basics of forming to the use of the machine’s computer controls. Worn, damaged or poor quality dies or filler blocks can directly affect part quality. Using good tooling, selecting the correct tooling for the job and setting them up properly can produce good part quality. Quality of material can affect angular tolerances of the bend. This is due to normal material thickness variations found in commercial steels as well as hard and soft spots in the metal. Using a good grade of material and the proper tooling setup will minimize the variations. The contents of this manual will assist in understanding the operation, safe use and maintenance of the CINCINNATI PROFORM Hydraulic Press Brake. Read this manual before operating the press brake.