Download Clear-Com TEMPEST 2400 Specifications
Transcript
Antenna Location Wired Intercom Connection Proper antenna location is essential for the best system performance and maximum range. Antenna positioning is important with all RF systems and in all applications. Locate the Tempest base station antennas as high as possible for your application to maximize line-of-sight RF operation. Positioning the antennas higher than head level is the minimum acceptable height for most applications. Maintaining line of sight between the base station antennas and the beltstation(s) is ideal. If possible, locate the two antennas at least 10 feet apart from each other, but not more than 50 feet apart from each other, to add spatial diversity. This illustration has compressed antenna spacing due to print limitations. Antenna pairs should be at least 24 inches apart. Arrange the two antennas in different physical orientations, to add polarization diversity. Positioning the antennas in a “V” formation at an angle of between 45 and 90 degrees to each other is recommended. When using multiple base stations, keep as much space between the antenna pairs as possible, but at least twenty-four inches is recommended. Increase the distance between antennas to improve performance. When rack mounting the Tempest base station or when it is stacked with other equipment always remote mount antennas or use the Tempest Remote Transceiver to assure maximum operational range. If possible, locate the antennas away from any metal obstructions and away from walls or other significant structures, by at least 24 inches. When using omni-directional (Whip) antennas always locate the antennas as close to the center of the coverage area as possible. Omni-directional antennas have a circular pattern and radiate RF energy equally in all directions at approximately a 90° angle to the element of the antenna. Always make sure that both base station antennas are connected securely. Proper antenna connection and location of both antennas at all times is necessary for satisfactory system performance and maximum operational range. Other antenna options are available including directional and higher gain antennas. Please contact your dealer for more information on optional antennas. Only use approved antennas. Unauthorized antennas may be illegal. Using more than one base station permits an increase in the number of wireless beltstations within an area, or by utilizing the iSelect roaming feature, allows increasing the area covered and even allows for the creation of separate but adjacent or overlapping coverage areas. The number of base stations that can be utilized in a system is limited by RF competition between systems and several other RF conditions. Judicious placement of antennas can help facilitate a large number of wireless beltstation users on a single system. Clear-Com Communication Systems Tempest 2400 Wireless Intercom System Page 24 of 100