Download Multi-Tech ISIHI-2S Specifications
Transcript
Appendix 8. Request telephone company to provide the following ISDN TA configuring information (record here): ISDN Switch Type: ____________________ ISDN Switch Protocol Version: ___________ ISDN Phone Number 1: ________________ ISDN Phone Number 2: ________________ (if 2B+D ordered) ISDN Line Type: ______________________ (point-to-point or multipoint) If MultiPoint, SPID Number 1: ___________ (with prefix and suffix) If MultiPoint, SPID Number 2: ___________ (with prefix and suffix) 9. If you use standard 5ESS or DMS-100, your protocol selection is complete. Fax the information in steps 1-8 to your phone company. If you use 5ESS Custom or DMS100 Pvc1 protocol support, continue with 5ESS Custom or DMS-100 Pvc1 below. 5ESS Custom Line Additional Parameters The AT&T 5ESS central office telephone switch supports a proprietary ISDN Dchannel call control protocol called Custom, based on CCITT recommendations. The ISDN TA configured for switch type AT&T 5ESS works with lines providing this protocol on 5ESS switches with software version 5E6 or later. The ISDN TA supports the following configurations on 5ESS Custom lines: Point-to-Point with one phone number (recommended configuration with no POTS interface) Multipoint with one phone number Multipoint with two phone numbers (recommended configuration with POTS interface) The requirements for the 5ESS line are shown below: B1 Service: DMD (On-demand) B2 Service: DMD (On-demand) Data Class Line: PM (Point-to-MultiPoint) Max. B Channels: 2 Number of CSV Calls: 2 CSV Bearer Channels: Any Number of CSD Calls: 2 Circuit Switched: Any Terminal Type Bearer Channels: Type A Multipoint lines require the phone company to create a SPID for each phone number on the line. Except for the ability to spread two calls across two phone numbers, multipoint lines offer no special features and may create complications. However, if you use a multipoint line, the parameters are similar to the point-to-point lines, except for the SPIDs. MultiModem ISI Hybrid Series, ISIHI-2S/2U 143