Download C-more micro EA1-S6MLW Specifications

C-more 4” & 6” Micro-Graphic PLC Connections
Cabling requirements
When using the built in RJ12 serial port (Port1) on models
EA1-S6ML or EA1-S6MLW to connect with the CLICK,
ProductivitySeries, DL05, DL06, DL105, DL205, D3-350
and DL405 CPUs, your cabling choices are fairly simple.
• DV-1000CBL — connects to CLICK, P3-550, DL05, DL06, DL105,
DL205, D3-350 and D4-450 phone jack.
• D4-1000CBL — connects to all DL405 CPU 15-pin ports.
A maximum cable length of 10 feet between the EA1-S6ML
or EA1-S6MLW and the PLC is recommended when
powering the panel in Low-Power Mode from the PLC. The
EA1-T4CL and EA1-T6CL cannot be powered from a PLC.
Communication Ports
EA1-T4CL
Expansion
Connector
R**. 1 2 3 4 5
MODEL:EA1-T4CL
USB Type B
Programming Port1
R
INPUT:12-24V 0.19-0.38A
0.19-0.38A Class2
Class2
Date code:9048
MADE IN CHINA
7M17
IND.CONT.EQ.
EA1-T4CL＋094018001
EA1-T4CL＋
The C-more 4” and 6” Micro-Graphic panels can communicate through its built-in 15-pin serial port (Port2) via RS232, RS-422 and RS-485 using these cables.
• EA-2CBL — connects to CLICK, P3-550, DL05, DL105, DL205,
D3-350 and D4-450 phone jack.
• EA-2CBL-1 — connects to D2-250, D250-1, D2-260, DL06 VGA
connector.
•
•
•
•
•
•
•
6
LE
Signal
11 TXD+ (422/485)
2
TXD (232C)
7
CTS (232C)
12 TXD– (422/485)
3
RXD (232C)
8
RTS (232C)
13 Term. Resistor
4
Future
9
RXD+ (422/485)
14 do not use
5
Logic GND
10 RXD– (422/485)
15 do not use
RJ12 serial
communications Port1
R01. 1 2 3 4 5
MODEL:EA1-S6MLW
R
INPUT:12-24V 6.5W
Date code:****
MADE IN CHINA
LISTED
7M17
IND.CONT.EQ.
EA1-S6MLW + serial number
8
1
15
9
PLC 15-pin serial
communications Port2
Pin
Signal
1
Logic GND
2
not used
3
RXD (232C)
4
TXD (232C)
5
+5 VDC
6
Logic GND
RS-232
Pin
Signal
Pin
1
Frame GND
6
Signal
Pin
Signal
2
TXD (232C)
7
3
RXD (232C)
8
4
Future
9
5
Logic GND
10 RXD– (422/485)
15 do not use
LE
11
CTS (232C)
12 TXD– (422/485)
RTS (232C)
13 Term. Resistor
RXD+ (422/485)
14 do not use
TXD+ (422/485)
RS-232/422/485
EA1-T6CL
C-more 6” STN Micro-Graphic Port 1 to
CLICK PLC Port 2
USB Type B
Programming Port1
Expansion
Connector
C-more 6” STN
Micro-Graphic
Panel
PLC 15-pin serial
communications Port2
Port 1
R01. 1 2 3 4 5
MODEL:EA1-T6CL
R
INPUT:12-24V 6.5W Class2
Date code:****
MADE IN CHINA
LISTED
7M17
IND.CONT.EQ.
EA1-T6CL + serial number
Pin
Port 2
Signal
Expansion
Connector
AutomationDirect Productivity Series
AutomationDirect Do-more
AutomationDirect CLICK (Modbus)
DirectLOGIC K-sequence, DirectLOGIC DirectNET, DirectLOGIC
Modbus (Koyo Addressing)
Modbus RTU
Allen Bradley DF1 Full Duplex, Allen Bradley DF1 Half Duplex,
Allen Bradley PLC5 DF1, AB DH485
Omron Host Link (C200 Adapter, C500)
Omron FINS serial (CJ1, CS1)
GE SNPX (90/30, 90/70, Micro 90, VersaMax Micro)
Mitsubishi Melsec FX
Siemens PPI
Entivity Modbus RTU
AutomationDirect GS Drives
AutomationDirect SOLO Temperature Controllers
Mitsubishi Q/QnA
CLICK PLC
Pin
EA1-S6ML & EA1-S6MLW
6 5 4 3 2 1
•
Pin
Frame GND
RS-232/422/485
Drivers for your Controller
•
•
Signal
1
PLC 15-pin serial
communications Port2
The EA1-T4CL and EA1-T6CL can only communicate to a
controller through the 15-pin serial Port2; the USB Port1 on
these TFT models is for programming only.
•
•
•
•
Pin
DV-1000CBL
serial cable
8
1
15
9
Signal
Pin
1
Frame GND
6
LE
11 TXD+ (422/485)
2
TXD (232C)
7
CTS (232C)
Signal
Pin
12 TXD– (422/485)
Signal
3
RXD (232C)
8
RTS (232C)
13 Term. Resistor
4
Future
9
RXD+ (422/485)
14 do not use
5
Logic GND
10 RXD– (422/485)
15 do not use
RS-232/422/485
Volume 14
e11-60
Operator Interface
1 - 80 0 - 633 - 0405