Download MUTOH ValueJet VJ-1604 Instruction manual

VJ-1604 QUICK REFERENCE
Name
Function
10
Maintenance cover
Used to prevent the user from touching the inner mechanical section.
Open and close in the following cases.
• When cleaning the cleaning wiper
• When cleaning around the print head
It is normally closed.
11
Waste fluid valve
Open and close when discharging the waste fluid from the waste fluid tank.
It is normally closed.
12
Adjuster
Used to install the printer horizontally.
13
Media holder plate
Installed inside of the front cover.
By attaching media holder plates to both sides of the media, it is possible to
prevent warpage.
2 Product overview
2.1.2
No.
Rear section
3
4
2
1
5
67
No.
1
Name
Function
1
Roll media holders
Used to load the roll media.
Include flanges where roll media is attached, and the levers that fix the roll
media holders.
2
Media feed slot
Used for feeding media.
3
Ink cartridge slot
Insert the ink cartridge.
4
Media guide
Used for feeding media smoothly when the media is set or printed.
The heater (pre heater) to warm media is installed.
5
AC inlet
Used for connecting the power cable.
6
USB connector
Not used for this printer.
7
Network interface connector
Connects a network interface cable.
2 Product overview
2-3