Download Bematech MP-2500 TH User`s manual

MP-4200 TH Programmer’s Manual - Revision 1.0
GS F9h D m n
[Function]
[Format] Decimal
[Range]
[Default] [Description]
Activate buzzer on cut
ASCII GS F9h D m n
Hexadecimal
1D F9 44 m n
29 249 68 m n
0≤m≤2
0 ≤ n ≤ 255
m=0
n = 200
• This command tells the printer to active the buzzer at the same time of a cut is being performed.
• The buzzer to be activated is defined by m as follow:
m
buzzer
0
none (deactivate previous settings)
1
internal
2
external
• (n × 100ms) defines the activation time
GS F9h E n
[Function]
[Format]
[Range]
[Default]
[Description]
Set DHCP usage.
ASCII Hexadecimal
Decimal
0 ≤ n ≤ 255
n=0
GS F9h E n
1D F9 45 n
29 249 69 n
If LSB of n is 1, the DHCP is enabled.
GS F9h S m ip1 ..ip 4 n c1 ..cn
[Function]
[Format] [Range]
[Default] [Description]
[Notes]
Set SNMP settings
ASCII GS F9h S m ip1..ip4 n c1..cn
Hexadecimal
1D F9 53 m ip1..ip4 n c1..cn
Decimal
29 249 83 m ip1..ip4 n c1..cn
0 ≤ n ≤ 64
m=0
n=0
This command sets SNMP trap parameters.
• When m = 0, SNMP traps are disabled.
• When m ≠ 0, SNMP traps are enabled.
• n defines the SNMP community and is limited to 64 bytes.
• c1..cn define the community name.
Valid only when ethernet or wi-fi interface is being used.
97