Download Danfoss TripleLynx CN Technical data

Transcript
12. Technical Data
12.5. Auxiliary Interface Specifications
Parameter
Serial Communication
Common cable specification
RJ45 (2 pcs.) connectors
Terminal block
Parameter Details
Cable jacket diameter (⌀)
Cable type
Cable Characteristic Impedance
Max. cable length
Wire gauge
Cable shield termination
Maximum wire gauge
Cable shield termination
Max. number of inverter nodes
Galvanic interface insulation
Direct contact protection
Double/Reinforced insulation
Short circuit protection
Communication
Star and daisy chain
Common cable
Max. cable length between inverters
Specification
Max. number of inverters
Cable type
Temperature sensor input
Cable specification
Cable jacket diameter (⌀)
Cable type
Cable shield termination
Maximum wire gauge
Maximum resistance per wire
Maximum cable length
Sensor specification
Nominal resistance/temperature
coefficient
Measurement range
Measurement accuracy
Direct contact protection
Double/Reinforced insulation
Short circuit protection
Irradiation sensor input
Cable specification
Cable jacket diameter (⌀)
Cable type
Sensor Specification
Direct contact protection
Short circuit protection
Energy meter input
Cable specification
Sensor Input Specification
Direct contact protection
Short circuit protection
Specification
RS485
2 x 5-7 mm
Shielded Twisted Pair (STP) (Cat 5e)2)
100 Ω – 120 Ω
1000 m
24-26 AWG (depending on mating
metallic RJ45 plug)
Via metallic RJ45 plug
2.5 mm2
Via EMC cable clamp
634)
Yes, 500 Vrms
Yes
Yes
Ethernet
100 m (total network length: unlimited)
1001)
Shielded Twisted Pair (STP) (Cat 5e)2)
3 x PT1000 3)
4-8 mm
Shielded Single Pair - 2-wire
Via EMC cable clamp
2.5 mm2
10 Ω
30 m
3.85 Ω/oC
-20 oC - +100 oC
±3 %
Yes
Yes
x1
4-8 mm
Shielded Single Pair - Number of wires
depend on the sensor type used
Cable shield termination
Via EMC cable clamp
Maximum wire gauge
2.5 mm2
Maximum resistance per wire
10 Ω
Maximum cable length
30 m
Sensor type
Passive
Measurement accuracy
±5 % (150 mV sensor output voltage)
Output voltage of sensor
0-150 mV
Max. output impedance (sensor) 500 Ω
Input impedance (electronics)
22 kΩ
Double/Reinforced insulation
Yes
Yes
S0 input
x1
4-8 mm
Cable jacket diameter (⌀)
Cable type
Shielded Single Pair - 2-wire
Cable shield termination
Via EMC cable clamp
Maximum wire gauge
2.5 mm2
Maximum cable length
30 m
Sensor input class
Class A
Nominal output current
12 mA for an 800 Ω load
Maximum short circuit output cur- 24.5 mA
rent
Open circuit output voltage
+12 VDC
Maximum pulse frequency
16.7 Hz
Double/Reinforced insulation
Yes
Yes
12
Table 12.5: Auxiliary Interface Specifications
L00410582-01_02
101