Download Siemens TC35 Terminal Specifications

TC35i AT Command Set
Confidential / Released
6.2
^SSTN Remote-SAT Notification
Proactive
Commands
Every time the SIM application issues a proactive command, via the ME, the TA
will receive a notification. This indicates the type of proactive command issued.
AT^SSTGI must then be used by the TA to request the parameters of the proactive command from the ME.
Upon receiving the ^SSTGI response from the ME, the TA must send AT^SSTR
to confirm the execution of the proactive command and provide any required user
response, e.g. selected menu item.
Unsolicited result code
^SSTN: <cmdType>
Parameters
<cmdType>
Terminate
Proactive
Command
Proactive command ID
When the SIM application has issued a proactive command, via the ME, to the
TA, it is possible that this command must be terminated. The ^SSTN Unsolicited
Result Code is sent but with a different command type to indicate the termination
of the specified command.
Unsolicited result code
^SSTN: <cmdTerminateValue>
Parameters
<cmdTerminateValue>
SIM Application returns to
main menu
Terminate proactive command ID
Notification to the TA when the SIM Application has finished a command cycle
and again enters its main menue.
This URC should be used to open this menue on the sreen.
Unsolicited result code
^SSTN: <254>
Reference
Note
Siemens
TC35i_ATC_V01.05
Page 181 of 278
04.08.2003