Download BYD e6A Owner`s manual

BYD e6A AUTO Owner's Manual
f. Remove wheel bolts and replace the tire.
Take off the flat tire and put it aside.
Roll the spare tire to the installation position,
wheel bolts may get loose, which may cause
Tips
the tire falling off in driving.
Do not apply engine oil or lubricant on the
Reinstall Wheel Bolts
bolts, or they will get loose, which may
cause the wheel detached and lead to
align the bolt to the tire hole, and then raise
serious accident. If there is engine oil or
the tire until the top bolt fits into the screw
lubricant on the bolts or nuts, clean them
hole. Rotate the tire. Install all bolts into the
immediately.
corresponding screw holes.
Lower Down Vehicle
g. Reinstall all wheel bolts manually.
To reinstall bolts, please manually tighten
them with wedged end inward first. Push the
wheel backward and try to further tighten the
Before installation, please brush off all
corrosive materials on the installation surface
with a wire brush. During installation, the
metal area on the installation surfaces must
be in well contact with each other, or the
3-8 Emergency Treatment
bolts manually.