Download Enigma video processor User manual

Code: ENIGMA III User Manual
Edition: 1 Revision: 4
Date: 19/12/2008
Page: 40/97
SpeckleRemoverZ: Reflectivity speckle remover
SyncModeParam: Sync mode
TagConfiguration: Serial TAGS configuration
Trig0Duration: Tigger 0 duration
Trig0Enable: Tigger 0 enable/disable
Trig0Invert: Tigger 0 invert
Trig0Start: Tigger 0 start
Trig1Duration: Tigger 1 duration
Trig1Enable: Tigger 1 enable/disable
Trig1Invert: Tigger 1 invert
Trig1Start: Tigger 1 start
UDPTagsHost: host that sends tags in UDP
UDPTagsPort: localhostport for UDP tags
ZdrOffset: ZDR offset
ZeroFilter: Clear IIR filter for every ray
dbz0: DBZ0
gasAttenuation: Gas Attenuation
noisePowerH: linear noise power horizontal
noisePowerV: linear noise power vertical
thresholdFlagsTable: Threshold flag table
To set a parameter type: set <param_name> <value>
To get a parameter type: get <param_name>
SDP responds:
get errormsg=null <Parameter>=<Value>
if successfull, or
get errormsg='<error text>'
if failed.
Commands start some actions.
General syntax is:
<Command> [<Arg>=<Value> ...]
SDP responds:
<Command> errormsg=null [<Arg>=<Value> ...]
if successful, or
<Command> errormsg='<error text>'
GAMIC Proprietary