Download Asus Terminator P4 533 Technical information

130
A: A short-wave cable is required for this connection. A cable from Cable Group D is required.
B: One of these devices has an integrated optical port but the other requires an optional Short-Wave GBIC (P/N 03K9308) to complete the connection. A cable form Cable Group D is required.
C: One of these devices has an integrated optical port but the other requires an optional or available Short-Wave GBIC (P/N 03K9308) to complete the connection. A cable from Cable Group D is required.
D: Both devices have integrated short-wave optical ports. The IBM SAN Managed Hub (P/N 35341RU) has a single GBIC port that could be configuredfor short-wave functionality with an optional shortwave GBIC (P/N 03K9308).
E: This is a hardware connection.
F: This device supports the use of Short-Wave (P/N 03K9308) and Long-Wave (P/N 03K9307) GBICs. Both devices must have the same type of GBIC installed for a valid connection. A cable from Cable
Group D or customer-supplied long-wave cable is required.
G: The Netfinity FAStT500 Mini Hub (P/N 00N6882) can connect to the IBM SAN Fibre Channel Managed Hub (P/N 35341RU) via optional short-wave or long-wave GBICs. Short-wave connections from the
Mini Hub may connect to either an integrated short-wave optical port or an optional short-wave GBIC (P/N 03K9308) on the IBM SAN Fibre Channel Managed Hub. Long-wave connections from the Mini
Hub may connect to an optional Long-Wave GBIC (P/N 03K9307) installed in the IBM SAN Fibre Channel Managed Hub.
H: Connections to the Netfinity FAStT500 RAID Controller are made through optional Short-Wave (P/N 03K9308) or Long-Wave (P/N 03K9307) GBICs installed in an available or optional Netfinity FAStT500
Mini Hub (P/N 00N6882).
I: This device supports the use of available (4 included) or optional Short-Wave (P/N 03K9308) and optional Long-Wave (03K9307) GBICs. Both devices must have the same type of GBIC installed for a valid
connection. A cable from Cable Group D or customer-supplied long-wave cable is required.
1. The number of optical ports on a device displayed as: Integrated Ports/GBIC Ports with installed short-wave GBICs/Available GBIC Ports. Standard GBICs and optical ports are always short-wave; i.e., the 2109S16 is displayed as 0/4/12. This
would mean that the device has 0 integrated optical ports, 4 installed short-wave GBICs and 12 available or open GBIC ports that can be configured as either short-wave (P/N 03K9307) or long-wave (P/N 03K9308) with optical GBICs.
2. Standard GBICs and integrated optical ports are always short-wave.
3. Device has an integrated short-wave optical port. Does not require an optional GBIC.
4. Connection requires an optional GBIC installed in an available or optional Netfinity FAStT500 Mini Hub (P/N 00N6882). Netfinity FAStT500 RAID Controller (P/N 35521RU) uses up to 4 Mini Hubs (2 standard) with GBICs to provide up to 8
connections for host devices and up to 4 Mini Hubs (2 standard) with GBICs to provide up to 8 connections for storage devices.
5. This device and the Netfinity FAStT500 Mini Hub (P/N 00N6882) can not be connected when the Mini Hub is installed in the Storage side of the Netfinity FAStT500 RAID Controller (P/N 35521RU).
6. This device and the Netfinity FAStT500 Mini Hub (P/N 00N6882) can not be connected when the Mini Hub is installed in the Host side of the Netfinity FAStT500 RAID Controller (P/N 35521RU).
7. The IBM SAN Fibre Channel Managed Hub has 7 integrated, short-wave optical ports. The eighth port is a GBIC slot that can be configured either as short-wave or long-wave.
8. In configurations with the IBM Fibre Channel Switch (P/N 2109S08/S16), all host systems must be attached to the FC Switch. Only storage systems can be attached to the SAN Fibre Channel Managed Hub.
9. No more than two Netfinity Fibre Channel Hubs (P/N 35231RU) should be connected together.
10. For optimum performance, no more than two RAID Controller Units (P/N 35261RU) should be attached to a single hub.
11. Not supported with the Netfinity FAStT500 RAID Controller (P/N 35521RU).