Download AMX RMS CODECRAFTER Technical information

Configuration Page
System Licensing
Licensed
The type of RMS server license. Standard indicates a
constrained license while Premium is a fully functioning
version of RMS.
Software Serial Number
The Serial number of the server software and the license
key.
Total Scheduling Licenses
The total number of scheduling licenses installed.
Scheduling Licenses In Use
The number of scheduling licenses in use.
Scheduling Licenses Available The number of scheduling licenses available for use.
Total Asset Licenses
The total number of asset licenses installed.
Asset Licenses In Use
The number of asset licenses in use.
Asset Licenses Available
The number of asset licenses available for use.
Certificate ID
This table lists the client certificates installed on the
license key. Each client certificate has a certificate ID.
Client Type
The client type of the license, either Asset or Scheduling.
Status
The current status of the license Certificate ID. Invalid
licenses do not function.
Count
Each client certificate has a quantity of client licenses.
InUse
The number of licenses in use on the selected Certificate
ID.
Date
The date the Certificate ID was registered with the RMS
server.
Options
Remove - Removes the Certificate ID and all of its
licenses from the RMS server.
If the number of NetLinx connected systems is greater than the number of
licenses available you can still track them in the Unassigned NetLinx Systems
section of the HotList. You will need more Client Licenses before you can create
rooms for these systems.
The RMS application can run without a license key. In Standard mode, you can
run the RMS application with limited capabilities for previewing the
functionality of the software:
No rooms without masters
No control function macro creation, scheduling, or execution
No external scheduling
Only 1 user other than admin
RMS Administrator’s Guide
181