Download Burnside TX2L User guide

Troubleshooting
If the amber light is indicating a fault, this may be caused by the following:
• There is no SIM installed.
Remedy: Turn off the unit and install a SIM. Then turn the unit back on.
• There is no battery installed and/or connected.
Remedy: Remove the power, install and connect the battery. Restore power.
• The unit has overheated.
Remedy: Locate the terminal in a cooler location. In particular keep out of direct sunlight.
• Low signal indication or continuous searching indication (see page 14).
Remedy, either locate the terminal in a more suitable position to achieve a stronger signal or use an
antenna connected via a cable that has gain or is located in a more suitable location
© 2014 Burnside Technology Ltd.
Page 21 of 24
Rev 1.1