Download Atlantic Technology 124 Instruction manual

46
Specifications
P-2000 7.1 Channel Preamp/Processor/Tuner
Specifications
FM Tuner Section
Sensitivity
Preamplifier Analog Section
IHF
10dBµ typ.
Input Impedance
26KΩ
50dB S/N
13dBµ typ.
Output Impedance (Main-RCA)
<600Ω
Rated Input
2.0Vrms
Mono
75dB typ.
Maximum Input
3.0Vrms
Stereo
69dB typ.
Rated Output (100kΩ load)
1.5Vrms
Minimum Load
5kΩ
Mono
0.2% typ.
Maximum Output
6.3Vrms
Stereo
0.3% typ.
Volume Range
S/N Ratio
Distortion
Stereo Separation
40dB typ.
Main
-80dB to +10.0 dB (1dB resolution)
Adjacent Channel Selectivity
70dB ± 400kHz
Zone
-80dB to +10.0 dB (1dB resolution)
Frequency Response
20 Hz to 15 kHz ± 1dB
Bass Management
High-Pass Slope
(Small Speaker Setting)
Crossover Frequency
(Adjustable 40/60/80/100/120/150Hz)
12 dB/octave (2nd order)
Low-Pass Slope (Subwoofer)
24 dB/octave (4th order), 40-150Hz as above
Tone Control
AM Tuner Section
Sensitivity (20dB S/N)
200uV
S/N
50dB
Distortion
0.7%
One Signal Selectivity (± 10kHz)
20 dB
Bass Center Frequency/Range
30Hz / ± 6dB
Treble Center Frequency/Range
10KHz / ± 6db
Video Section
Channel Separation (at 1kHz)
82dB
Bandwidth
Crosstalk Between Inputs (at 1kHz)
86dB
Preamplifier Digital Section
Frequency Response
Direct Inputs
10 Hz to 20 kHz +0 / -0.2 dB
Analog-DSP Inputs
10 Hz to 20 kHz +0 / -0.5 dB
Digital Inputs
10 Hz to 20 kHz +0 / -0.4 dB
THD+N (at Rated Input & Output)
Composite & S-Video
6 MHz –3dB
Component Green
50MHz -3dB
Component Red
50MHz -3dB
Component Blue
50MHz -3dB
All video inputs and outputs are 75 ohms, 1.5 Vp-p. Component inputs and outputs work with
any Standard requiring ultra-wide bandwidth including Component-RGB, HDTV, line doublers,
quadruplers, and scalers.
Digital Audio
6-Channel Direct Inputs
0.0035% (80 kHz BW)
Analog-Direct Inputs
0.0035% (AES17 filter)
Analog-DSP Inputs
0.005% (AES17 filter)
Digital Inputs
0.006% (80 kHz BW)
IMD (CCIF) @ 15 kHz & 16 kHz
6-Channel S/E Inputs
0.003%
All Other Analog Inputs
0.002%
Digital Inputs
0.005%
S/N Ratio (ref. 2.0Vrms A-weighted)
All digital audio inputs and outputs are to S/PDIF electrical (75 ohms, 0.5 Vp-p),
S/PDIF optical (Toslink), or AES / EBU (110 ohms, 5 Vp-p) standards as appropriate.
Processor
Crystal CS49326
Audio Converters
Digital Audio Inputs
CS8415A Digital Audio Interface up to 96kHz
Analog to Digital
CS5360 up to 24-bit/48kHz
Digital to Analog
CS4396 up to 24-bit/192kHz
General
Supply Voltage
105-130V, 60Hz only
All Direct Inputs
102dB
Power Consumption
45W
Analog-DSP Inputs
99dB
Fuse Rating
1.0A slow-blow 5x20 mm, 2.0A slow-blow 5x20mm
Digital Inputs
101 dB
Dimensions
Zone 2 Section
Frequency Response and Bandwidth
THD+N (at Rated Input & Output)
0.01% (80kHz BW)
IMD (CCIF at 15kHz & 1 kHz)
0.01%
S/N Ratio (ref. 2.0Vrms A-weighted) 97dB
Width
17.12 inches / 435 mm
Height
4.6 inches / 117 mm
Depth
14.76 inches / 375 mm
Weight
17.6 lbs. / 8 kg
Trigger Outputs 1, 2(Zone)
Sequential Delay 50 mA @ 12 VDC