Download Asus Terminator P4 533 Specifications

Back side
The back side of SCSI backplane faces the
rear panel when installed. This side
includes the power connectors, SCSI
interfaces for the motherboard SCSI
connector or the SCSI/RAID card and
terminator, an HDD fan connector, and
SMBus connectors.
• the upper SCSI interface of the backplane connects to the motherboard
SCSI connector or the SCSI/RAID card
• a SCSI multi-mode terminator (LVD/SE) is connected to the lower SCSI
interface of the backplane
Power connectors ( c o n n e c t p o w e r
plugs from the power supply)
Fan connector (for HDD fan)
68-pin SCSI connector
(connects the SCSI cable from t h e
motherboard SCSI connector or
the SCSI/RAID card)
68-pin SCSI connector
(with SCSI multi-mode terminator)
SMBus connector
[SMB_IN1] (connects the SMB cable
from the motherboard)
2-28
Chapter 2: Hardware setup