Download Black Box AC150A-2 Specifications

PRODUCT SHEET
[email protected]
[email protected]
www.biopac.com
MP150 SYSTEM SPECIFICATIONS
Analog Inputs
Number of Channels:
Absolute Maximum Input:
Operational Input Voltage:
A/D Resolution:
Accuracy (% of FSR):
16
±15 V
±10 V
16 Bits
±0.003
Input impedance:
1.0 M
Application Programming Interfaces options:
 Hardware Interface BHAPI

Software Interface ACKAPI
Analog Outputs
Number of Channels:
Max output with acquisition:
Output Voltage Range:
D/A Resolution:
Accuracy (% of FSR):
Output Drive Current:
2
2 channels
±10 V
16 bits
±0.003
±5 mA (max)
Output Impedance:
100 
Digital I/O
Number of Channels:
Voltage Levels:
Digital I/O Logic Type:
Input Voltage Range:
Input Clamp Current:
Output Drive Current:
External Trigger Input:
Logic Level Thresholds:
Input Low Voltage:
Input High Voltage:
16
TTL, CMOS
CMOS
-0.5 V to 5.5 V (max)
±20 mA (max)
±20 mA (max)
TTL, CMOS compatible - See also: External Trigger Inputs
1.50 V (max)
3.45 V (min)
Time Base
Min Sample Rate:
Trigger Options:
2 samples/hour
Internal, External or Signal Level
Power
Amplifier Module Isolation:
CE Marking:
Leakage current:
Fuse:
Provided by the MP unit, isolated clean power
EC Low Voltage and EMC Directives
<8 µA (Normal), <400 µA (Single Fault)
2 A (fast blow)
Device specs
MP150
Max Sample Rate
MP Internal Memory:
200 K samples/sec (400 K aggregate)
PC Memory/Disk:
200 K samples/sec (400 K aggregate)
Internal Buffer:
6 M samples
BIOPAC Hardware | MP150 Systems | Page 2 - 9
Updated: 2.25.2015