Download BIXOLON SPP-R300 Specifications

SPP-R300 Command Manual
<Function 2> GS ( F pL pH m a nL nH (m=2)
Code:
ASCII
Hex
Decimal
GS
1D
29
(
28
40
F
46
70
pL
04
4
pH
00
0
m
02
2
a
a
a
nL
nL
nL
nH
nH
nH
Range:
(pL + pH × 256) = 4 (pL = 4, pH = 0)
m=2
a = 0, 48
0 ≤ (nL + nH × 256) ≤ 65535 (0 ≤ nL ≤ 255, 0 ≤ nH ≤ 255)
Default:
nL = 0, nH = 0
Description:
■ This command sets the value for the adjustment of paper cutting position after sensing BM.
• pL, pH specifies (pL + pH × 256) as the number of bytes after pH (m, a, nL, and nH)
• nL, nH specifies [(nL + nH × 256) × vertical motion units] as the adjustment value.
Remarks:
■ This command affects to the cutting operations as follows:
• Paper cut by GS V m n.
• Paper cut after paper feeding triggered by the paper FEED button.
• Paper cut after initializing the BM.(optional)
• Paper cut after paper feeding with the cover closed.(optional)
■ This command is only effective for the forward paper feeding.
■ The maximum adjustable length is 400 mm. If the adjustment value to be specified exceeds the maximum value, the
adjustment value is automatically set to the maximum value.
Differences:
Rev. 1.00
None
BIXOLON
- 54 -