1
Download ADTRAN BlueSecure Controller Specifications
Transcript
services. In order to send broadcast and multicast traffic back out the EtherIP tunnels the following routes must be added under network>routing table>create static route entry for the appropriate managed interface. Broadcast Traffic Route Destination 192.168.160.255 Route Gateway 255.255.255.255 Netmask 255.255.255.255 Interface Managed This above example assumes we are referring to the managed physical network and the subnet is 192.168.160.0/24. If this is a managed vlan the Interface entry should be populated with the appropriate managed vlan. Multicast Traffic Route Destination 224.0.0.0 Route Gateway 255.255.255.255 Netmask 240.0.0.0 Interface Managed This above example assumes we are referring to the managed physical network. If this is a managed vlan the Interface entry should be populated with the appropriate managed vlan. You may also be required to allow services in the firewall policy of the appropriate role specific to the application. For example UDP 5353 for multicast DNS. WARNING. Configuring these broadcast/multicast routes in networks with large broadcast domains/subnets may cause performance issues. Are BSAPs counted against the user limits? No. BSAPs are excluded from the concurrent authenticated user limits and only count against the
