Download SATO MB410i Technical data

Unit 7: Appendix
TABLE 10: BARCODE TYPE (<ESC>D)
A
0
BARCODE
NW-7 (Codabar)
DESCRIPTION
RATIO
Set print data including the Start/Stop characters.
A, B, C, D, E, N, T, a, b, c, d, e, n, t. When the barcode print data is [123], specify
[A123A].
Barcode character pitch is enabled.
For print data, refer to the NW-7 code table.
1:2
Set print data to include the Start/Stop Character [*]. When the barcode print data is
[12345], specify [*12345*].
1
CODE39
2
Interleaved 2 of 5
Specify the print data in even-numbered digits. If specifying an odd-numbered digit, “0” will
be added to the head of the print data.
For print data, refer to the Interleaved 2 of 5 code table.
3
JAN/EAN13
The barcode will not have a guard bar and human readable information.
For print data, refer to the JAN/EAN13 code table.
Fixed
4
JAN/EAN8
The barcode will not have a guard bar and human readable information.
For print data, refer to the JAN/EAN13 code table.
Fixed
5
Industrial 2 of 5
Not supported. This will be ignored if specified.
---
6
Matrix 2 of 5
Not supported. This will be ignored if specified.
---
H
UPC-A
The barcode will not have a guard bar and human readable information.
For print data, refer to the UPC-A code table.
Barcode character pitch is enabled.
For print data, refer to the CODE39 code table.
1:2
1:2
Fixed
NOTE: The model composition ratio may not be available for some barcode types.
“i” Programming Reference
7-17
PN: 9001158B