Download Motorola HT1250 User guide

CONVENTIONAL RADIO SYSTEMS
Conventional radio systems typically refer to
unit-to-unit communications through a single
channel. Conventional systems also allow
radio users to extend communication coverage
by relaying their messages through a repeater.
To ensure coordinated use by multiple
talkgroups, each radio user must monitor the
channel or repeater before transmitting to
verify that the system is not currently busy.
HT1250•LS+ RADIO FEATURES
INTRODUCTION
Note:
•
•
•
•
•
•
•
•
14-Character Alphanumeric Display
7 Programmable Feature Buttons
Up to 15 PassPort and/or LTR Zones with
up to 16 Talkgroups per Zone
Up to 16 or 32 Conventional Channels
(depending on model capability)
X-Pand™ Audio Enhancement
Home Channel Revert
Telephone Interconnect
User-programmable Phone and Scan Lists
Voice Storage Capability
PassPort Zone Features
•
•
•
•
•
•
•
•
•
•
Radio Wide Features
8
English
Throughout this manual there are
features listed as Trunked and
Conventional. Trunked indicates
the feature functions in both
PassPort and LTR zones unless
otherwise noted. Conventional
indicates the feature functions in
Conventional zones only.
•
•
•
Unique Mobile Identification Number (MIN)
per radio
Unique Electronic Serial Number (ESN) per
radio
Registration/Deregistration upon Power-up
and Power-down
Automatic Seamless Roaming between
Networked Sites
Site/Talkgroup Restriction
Optional Primary Talkgroup
Primary Talkgroup Transmit Inhibit
Registered Site and Mobile Identity View
User-initiated Roam Request
Primary Auto Group Scan and PassPort
Group Scan
Roam (Site) Lock
Push-To-Talk (PTT) ID Aliasing