Download protech PROX-1750 Technical data

Basic setting of spring
preload, rear
without Electronic Suspension Adjustment (ESA II) OE
Your motorcycle's handling will suffer if you do
not match the spring-preload and
damping-characteristic settings.
Adjust the damping characteristic
to suit the spring preload.
Adjusting the spring preload
while the motorcycle is being ridden can lead to accidents.
Adjust the spring preload
only when the motorcycle is
stationary.
To increase spring preload,
turn handwheel 1 in direction
of arrow HIGH.
duction in spring preload requires softer damping.
Adjusting damping on rear
wheel
Make sure the ground is level
and firm and park the motorcycle.
Turn upper adjustment
wheel as far as possible in
direction of arrow LOW, then
turn 13 clicks in direction of
arrow HIGH (Full tank of gas,
with rider 187 lbs (85 kg))
53
z
Damping
Setting
The damping must be adjusted
to the road conditions and the
spring preload.
A rough road surface requires
softer damping than a smooth
road surface.
An increase in spring preload
requires firmer damping, a re-
4
Operation
To decrease spring preload,
turn handwheel 1 in direction
of arrow LOW.
Adjust damping with the toolkit
using the adjusting screw 1.