Download Crestron TPS-XDS Specifications

Crestron TPS-XDS
Docking Station for TPS-XTXRF
Operations Guide
This document was prepared and written by the Technical Documentation department at:
Crestron Electronics, Inc.
15 Volvo Drive
Rockleigh, NJ 07647
1-888-CRESTRON
Crestron TPS-XDS
Docking Station for TPS-XTXRF
Contents
Docking Station for TPS-XTXRF: TPS-XDS
1
Description................................................................................................................................. 1
Functional Description ................................................................................................ 1
Physical Description.................................................................................................... 1
Leading Specifications............................................................................................................... 3
Using the TPS-XDS................................................................................................................... 4
Problem Solving ........................................................................................................................ 6
Troubleshooting .......................................................................................................... 6
Further Inquiries.......................................................................................................... 7
Future Updates ............................................................................................................ 7
Return and Warranty Policies.................................................................................................... 8
Merchandise Returns / Repair Service ........................................................................ 8
CRESTRON Limited Warranty .................................................................................. 8
Operations Guide - DOC. 5846
Contents • i
Crestron TPS-XDS
Docking Station for TPS-XTXRF
Docking Station for TPS-XTXRF:
TPS-XDS
Description
Functional Description
The TPS-XDS is a docking station designed to power the Crestron IsysTM tilt
touchpanel equipped with the optional TPS-XTXRF Two-Way radio frequency (RF)
Transceiver Module. The TPS-XDS charges the TPS-XBTP Battery Pack when the
battery pack is installed in the touchpanel.
NOTE: Throughout this Operations Guide, an IsysTM tilt touchpanel equipped with
the optional TPS-XTXRF Two-Way RF Transceiver Module and TPS-XBTP
Battery Pack is referred to as “touchpanel” except where noted. For related
information, consult the TPS-XTXRF Operations & Installation Guide (Doc. 5844)
and TPS-XBTP Operations Guide (Doc. 5845). The latest versions of the guides are
available from the Downloads | Product Manual section of the Crestron website
(www.crestron.com).
The TPS-XDS powers the touchpanel as long as the electrical contacts of the
touchpanel and the TPS-XDS remain together. Depending on the operating
conditions of the touchpanel, the TPS-XDS will fast charge and/or slow charge the
battery to maintain optimum performance*. Power to the TPS-XDS is supplied by a
provided external power pack and the duration of the charge is continuous as long as
the battery is not fully charged. The touchpanel may be operated during the charging
process but charging time is extended.
* Refer to the latest revision of the TPS-XBTP Operations Guide (Doc. 5845),
Leading Specifications, for battery charging times.
Physical Description
The TPS-XDS (see following illustration) is housed in a black enclosure with
labeling on the left side and touchpanel docking area. On the left side of the unit are
two light-emitting diodes (LEDs). The PWR (GREEN) LED indicates that power is
available to the TPS-XDS, and the CHG (RED) LED indicates charge or touchpanel
in-use status. An external power pack supplies power via a direct current (DC)
power socket connector. Four rubber feet are on the base of the TPS-XDS for
stability and to prevent slippage.
Operations Guide - DOC. 5846
Docking Station for TPS-XTXRF: TPS-XDS • 1
Docking Station for TPS-XTXRF
Crestron TPS-XDS
TPS-XDS Physical Views
10.89 in
(27.67 cm)
CHG
5.37 in
(13.64 cm)
P WR
CRESTRON
ELECTRICAL CONTACTS
FOR TOUCHPANEL
1.26 in
(3.19 cm)
UNIT WEIGHT:
1.30 lbs (0.51 kg)
Port & Indicators
Two LED indicators and one DC power port are located on the left side of the
TPS-XDS. Refer to the diagram below and the following descriptions.
TPS-XDS Power Port & Indicators
PWR LED
(GREEN)
CHG LED
(RED)
DC POWER
PORT
PWR LED (Power Available)
Illuminates green when power is provided to the TPS-XDS via the external power
pack.
CHG LED (Charge)
Illuminates red when the touchpanel (without a battery pack installed) is docked and
being operated. The LED also illuminates whenever a properly docked touchpanel is
in standby mode and the TPS-XBTP is properly installed in the touchpanel. When
the TPS-XBTP is fully charged and the docked touchpanel is in standby mode or
OFF, the CHG LED goes out. While the touchpanel remains inactive (OFF), the
TPS-XDS automatically recharges the TPS-XBTP within 3-4 hours.
2 • Docking Station for TPS-XTXRF: TPS-XDS
Operations Guide - DOC. 5846
Crestron TPS-XDS
Docking Station for TPS-XTXRF
DC Power Port (not labeled)
Used to supply power via the external power pack. Crestron recommends specific
power packs for its devices. The provided power pack for the TPS-XDS is Crestron
part number PW-2420RU for non-international and international use. If you want to
use a power pack other than the Crestron model, verify that it meets the following
specifications and polarity.
Power Pack Specifications
POWER REQUIREMENTS
OUTPUT
120VAC 60Hz
or
240 VAC 50Hz
24VDC 2A minimum,
regulated
Power Pack Polarity
Leading Specifications
The following table provides a summary of leading specifications for the TPS-XDS.
Leading Specifications of the TPS-XDS
SPECIFICATIONS
DESCRIPTION
Dimensions and Weight
Height: 1.26 in (3.19 cm)
Width: 10.89 in (27.67 cm)
Depth: 5.87 in (13.34 cm)
Weight: 1.30 lb (0.535 kg)
As of the date of manufacture, the TPS-XDS has been tested and found to comply
with specifications for CE marking and standards per EMC and
Radiocommunications Compliance Labelling (N14176).
Operations Guide - DOC. 5846
Docking Station for TPS-XTXRF: TPS-XDS • 3
Docking Station for TPS-XTXRF
Crestron TPS-XDS
Using the TPS-XDS
WARNING: To avoid possible physical harm, damage to the TPS-XDS or
touchpanel, use only specified external power pack PW-2420RU or equivalent when
charging.
WARNING: Charge the touchpanel in a well-ventilated area away from sparks and
open flame. Do not use the touchpanel near heat sources such as radiators, heat
registers, stoves, or other apparatus.
CAUTION: Avoid accidental shorting of the electrical contacts to prevent possible
damage to the external power pack. If shorted, remove the shorting object(s) and the
power pack will automatically reset within 5-10 seconds.
NOTE: We recommend that instead of removing power from the TPS-XDS by
pulling the power plug out of DC power port, you set the OFF/ON switch on the
power pack to OFF.
NOTE: Make sure that the TPS-XBTP battery pack is properly installed in the
TPS-XTXRF equipped touchpanel.
NOTE: Charging of TPS-XBTP is determined by internal temperature, not voltage.
The TPS-XBTP/touchpanel will not charge if the internal temperature of the battery
pack is too high. Excessive temperature may be produced by high room temperature,
heavy usage of the TPS-XVGA/-BV RGB Computer Interface Card and/or TPSVID Video Card, blocked TPS-XTXRF vents, etc. The TPS-XBTP will begin to
recharge when cooled. Refer to the latest revision of the TPS-XBTP (Doc. 5845)
Operations Guide, Leading Specifications, for the battery operating temperature
range.
1.
Setup the external power pack according to the Operations Guide
provided with the power pack.
NOTE: The latest version of the PW-2420RU Power Pack Operations Guide (Doc.
5892) can be obtained from the Downloads | Product Manual section of the Crestron
website (www.crestron.com).
2.
Set the power pack OFF/ON switch to ON.
3.
Place the touchpanel on the TPS-XDS docking area as shown on next
page. The electrical contacts are self-aligning with the touchpanel.
4 • Docking Station for TPS-XTXRF: TPS-XDS
Operations Guide - DOC. 5846
Crestron TPS-XDS
Docking Station for TPS-XTXRF
Place Touchpanel on TPS-XDS
1
2
NOTE: The touchpanel may be operated during the charging process but charging
time is significantly extended. Depending on touchpanel model, activity, optional
expansion cards installed, backlight usage/brightness, etc., charge time may be from
8-1/2 to 14 hours. Refer to the latest revision of the TPS-XTXRF (Doc. 5844)
Operations Guide, Leading Specifications for more information on charging times.
NOTE: Operating time for an undocked TPS-XTXRF (battery installed) will vary
depending on touchpanel model, activity, optional expansion cards installed,
backlight usage/brightness, etc. For example, undocked operating time of a
TPS-XTXRF equipped TPS-6000 touchpanel with all optional cards and a new, fully
charged TPS-XBTP is typically 2-hours before charging is required. Refer to the
latest revision of the TPS-XBTP Operations Guide (Doc. 5845), Leading
Specifications, for battery charging times.
Operations Guide - DOC. 5846
Docking Station for TPS-XTXRF: TPS-XDS • 5
Docking Station for TPS-XTXRF
Crestron TPS-XDS
Problem Solving
Troubleshooting
The table below provides corrective action for possible problems. If further
assistance is required, please contact a Crestron customer service representative.
TPS-XDS Troubleshooting
TROUBLE
POSSIBLE
CAUSE(S)
Green PWR TPS-XDS is not
LED does not receiving power.
illuminate.
Power pack switch
not in ON position.
Power pack has
been shorted at
output plug. (Power
pack LED not lit.)
CORRECTIVE ACTION
Confirm that external power pack securely
plugged into outlet and that the connector is
properly attached to the TPS-XDS.
Position power pack switch to ON.
Allow 5-10 seconds for power pack to
automatically reset.
Disconnect power pack output plug from
TPS-XDS & reconnect.
Disconnect AC input plug from power pack
output & reconnect.
Replace power pack.
Touchpanel is fully No action is required.
Red CHG
LED does not charged and in
standby mode or
illuminate.
OFF.
TPS-XDS has
Properly position the touchpanel onto the
intermittent contact TPS-XDS.
with the
The contacts may be dirty. Unplug the external
touchpanel.
power pack from the TPS-XDS and clean the
TPS-XDS contacts with a dry, lint-free cloth.
TPS-XDS
Touchpanel/TPS- Allow touchpanel/TPS-XBTP to obtain room
does not
temperature before attempting to charge.
XBTP has been
charge
stored in a cold
touchpanel. environment.
Excessive
Touchpanel/TPSXBTP internal
temperature. *
TPS-XBTP will not Replace TPS-XBTP.
charge.
* A high internal temperature in the touchpanel may be caused by heavy usage of the TPSXVGA/-BV RGB Computer Interface Card and/or TPS-VID Video Card, blocked TPSXTXRF vents, high room temperature, etc.
6 • Docking Station for TPS-XTXRF: TPS-XDS
Operations Guide - DOC. 5846
Crestron TPS-XDS
Docking Station for TPS-XTXRF
Further Inquiries
If after reviewing this Operations Guide, you cannot locate specific information or
have questions, please take advantage of Crestron's award winning customer service
team by calling:
•
In the US and Canada, call Crestron’s corporate headquarters at
1-888-CRESTRON [1-888-273-7876].
•
In Europe, call Crestron International at +32-15-50-99-50.
•
In Asia, call Crestron Asia at +852-2341-2016.
•
In Latin America, call Crestron Latin America at +5255-5093-2160.
•
In Australia and New Zealand, call Crestron Control Solutions at
+61-2-9737-8203.
Future Updates
As Crestron improves functions, adds new features, and extends the capabilities of
the TPS-XDS, additional information may be made available as manual updates.
These updates are solely electronic and serve as intermediary supplements prior to
the release of a complete technical documentation revision.
Check the Crestron website (www.crestron.com) periodically for manual update
availability and its relevance. Updates are available from the Download | Product
Manuals section and are identified as an “Addendum” in the Download column.
Operations Guide - DOC. 5846
Docking Station for TPS-XTXRF: TPS-XDS • 7
Docking Station for TPS-XTXRF
Crestron TPS-XDS
Return and Warranty Policies
Merchandise Returns / Repair Service
1.
No merchandise may be returned for credit, exchange, or service without prior
authorization from CRESTRON. To obtain warranty service for CRESTRON
products, contact the factory and request an RMA (Return Merchandise
Authorization) number. Enclose a note specifying the nature of the problem, name
and phone number of contact person, RMA number, and return address.
2.
Products may be returned for credit, exchange, or service with a CRESTRON Return
Merchandise Authorization (RMA) number. Authorized returns must be shipped
freight prepaid to CRESTRON, 6 Volvo Drive, Rockleigh, N.J., or its authorized
subsidiaries, with RMA number clearly marked on the outside of all cartons.
Shipments arriving freight collect or without an RMA number shall be subject to
refusal. CRESTRON reserves the right in its sole and absolute discretion to charge a
15% restocking fee, plus shipping costs, on any products returned with an RMA.
3.
Return freight charges following repair of items under warranty shall be paid by
CRESTRON, shipping by standard ground carrier. In the event repairs are found to
be non-warranty, return freight costs shall be paid by the purchaser.
CRESTRON Limited Warranty
CRESTRON ELECTRONICS, Inc. warrants its products to be free from manufacturing defects in
materials and workmanship under normal use for a period of three (3) years from the date of
purchase from CRESTRON, with the following exceptions: disk drives and any other moving or
rotating mechanical parts, pan/tilt heads and power supplies are covered for a period of one (1)
year; touchscreen display and overlay components are covered for 90 days; batteries and
incandescent lamps are not covered.
This warranty extends to products purchased directly from CRESTRON or an authorized
CRESTRON dealer. Purchasers should inquire of the dealer regarding the nature and extent of the
dealer's warranty, if any.
CRESTRON shall not be liable to honor the terms of this warranty if the product has been used in
any application other than that for which it was intended, or if it has been subjected to misuse,
accidental damage, modification, or improper installation procedures. Furthermore, this warranty
does not cover any product that has had the serial number altered, defaced, or removed.
This warranty shall be the sole and exclusive remedy to the original purchaser. In no event shall
CRESTRON be liable for incidental or consequential damages of any kind (property or economic
damages inclusive) arising from the sale or use of this equipment. CRESTRON is not liable for
any claim made by a third party or made by the purchaser for a third party.
CRESTRON shall, at its option, repair or replace any product found defective, without charge for
parts or labor. Repaired or replaced equipment and parts supplied under this warranty shall be
covered only by the unexpired portion of the warranty.
Except as expressly set forth in this warranty, CRESTRON makes no other warranties, expressed
or implied, nor authorizes any other party to offer any warranty, including any implied warranties
of merchantability or fitness for a particular purpose. Any implied warranties that may be imposed
by law are limited to the terms of this limited warranty. This warranty statement supercedes all
previous warranties.
Trademark Information
All brand names, product names, and trademarks are the sole property of their respective owners. Windows is a registered
trademark of Microsoft Corporation. Windows95/98/Me/XP and WindowsNT/2000 are trademarks of Microsoft
Corporation.
8 • Docking Station for TPS-XTXRF: TPS-XDS
Operations Guide - DOC. 5846
Crestron TPS-XDS
Docking Station for TPS-XTXRF
This page intentionally left blank.
Operations Guide - DOC. 5846
Docking Station for TPS-XTXRF: TPS-XDS • 9
Docking Station for TPS-XTXRF
Crestron TPS-XDS
This page intentionally left blank.
10 • Docking Station for TPS-XTXRF: TPS-XDS
Operations Guide - DOC. 5846
Crestron TPS-XDS
Docking Station for TPS-XTXRF
This page intentionally left blank.
Operations Guide - DOC. 5846
Docking Station for TPS-XTXRF: TPS-XDS • 11
Crestron Electronics, Inc.
15 Volvo Drive Rockleigh, NJ 07647
Tel: 888.CRESTRON
Fax: 201.767.7576
www.crestron.com
Operations Guide - DOC. 5846
03.02
Specifications subject to
change without notice.