Download Compex MIMOJunior 802.11n Specifications

Setup your WAN
(Available in Wireless Routing Client and Gateway modes)
NOTE:
Any changes to the WAN Setup will only take effect after rebooting.
Setup your WAN to share Internet connection among the clients of the
access point.
Setup your WAN for cable internet whereby WAN IP address is
dynamically assigned by ISP
The access point is pre-configured to support this WAN type.
However, you may verify the WAN settings with the following
steps:
Step 1:
Under CONFIGURATION on the command menu, select WAN Setup.
S t ep 2 :
On the WAN Dynamic Setup screen, verify that the WAN Type is
Dynamic (DHCP). Otherwise, click on the Change button.
Step 3:
Select Dynamic IP Address and hit the Apply button.
Reboot to let the settings take effect.
Page 66