Download BARIX Streaming Client Install guide

Revision History
Firmware
Version
Date
Initials
Notes
Updated sections 1.2, 1.5, 4.1
Chapter 7 “Display interface” added
Added relay support, B274
Added repeat function
Added sleep function
Described keyboard.html and added an image of the remote
control
Added error code 19 (Audio Format Not Supported)
Added setup parameter B498
Added setup parameter i680
Updated FLASH layout
Default value for URL1 is the Barix radio
Removed messages.ini
Added commands c=71 and c=72
update.ini updated
WEB UI files updated
Described the display interface
Added audio peak levels
Default value of URL1 updated
Added relays 2-16
Relay 1 moved from B274 to B252
Added &Lstate dynamic mark variables 31 and 51..66
Added priority message volume B243
Added dynamic marks 32, 33 and 34
Added dynamic mark &LSetup 23
MTELL renamed to Barimon
Added command port option to B498
Section 3 rewritten, added serial command interface
Added Factory Defaults and B241 and B242 (min and max
volume)
Setup.cgi section rewritten.
Added section WEB server together with a description of the
mimetype.ini file
Added time of the last error
Default stream check period changed from 10-180s to 1-30s
(feature #052.08)
Setup version increased to 1.2
Removed MMS and MMST
Frame based buffering
&Lstate variable nr. 38
New frame bufferparameters in Barimon report
New UI files
Added TCP and UDP command ports
new parameter "usb_backup_switch_immediately" in
update.ini
balance as B245 and b= command
Volume interface changed from 5% to 1% steps. Setup
version changed from 1.2 to 1.3.
Added “V=” command (volume in 1% steps)
Barimon alarm sent also on stream recovery
Default channel number 1
AD gain settings
Volume Offset
Currently decoded audio format &Lstate(42
URL protocols, Line-in and triggered playback in Streaming
Settings section
New parameter priority volume control
Updated remote-update example, using new parameter
volume_100
Added file inputs.txt and dynamic mark to read I/O status
Relay while priority message
Added IPAM type as dynamic mark 45
Flash memory layout updated (chapter 2.2)
Remote Firmware Update requires 2MB Flash devices (chapter
7)
2MB requirement for remote FW update
EOL required at the end of the remote-update ini file.
Extra &Lstate parameters 46 and 47 for remote firmware
update.
B2.03
14.05.2008
PK
A2.04
A2.05
06.06.2008
09.06.2008
PK
PK
15.09.2008
PK
30.09.2008
05.01.2009
09.01.2009
12.01.2009
19.01.2009
21.01.2009
29.01.2009
PK
PK
PK
PK
PK
PK
PK
30.01.2009
07.03.2009
31.03.2009
PK
PK
PK
01.04.2009
08.04.2009
17.04.2009
18.04.2009
17.06.2009
24.06.2009
13.07.2009
30.07.2009
PK
PK
PK
PK
PK
PK
PK
PK
31.07.2009
05.08.2009
PK
PK
A2.11
21.08.2009
PK
A2.12
A2.13
A2.14
17.09.2009
29.12.2009
03/01/2010
04/06/10
04/22/10
04/27/10
10/18/10
11/01/10
PK
PK
PK
PK
PK
PK
PK
PK
11/09/10
PK
A2.24
12/03/10
30/05/11
PK
PK
A2.26
02.28
09/06/11
11/23/11
PK
PK
02.29
18/01/12
PK
03.02
02/29/12
04/05/12
PK
PK
03.05
17.09.12
PK
A2.06
A2.08
A2.09
A2.20