Download Alesis 2 Specifications
Transcript
SW 5 OFF ON OFF ON • SW 6 OFF OFF ON ON MIDI Device ID 00 hex 29 hex 49 hex 69 hex Switches 7 and 8. Are not currently implemented and have been reserved for future use. 7.5 EXT WORD CLOCK The AI-2 will measure the frequency of an external word clock reference and display the measurement in the status menu. The AI-2 measurement has an accuracy of ±5 Hz and is intended for information and troubleshooting purposes only. 7.6 INTERNAL VARI REFERENCE When the AI-2 is selected as master in a synchronizer system. the AI-2 internal variable reference can be used to run ADAT transports off speed. Select Int Var in the reference menu and then use the Var option to set the speed variation. The speed variation range is nominally -300 to +100 cents at 48.000 KHz, which is the same as the ADAT pitch range. The AI-2 display shows the pitch variation and the equivalent speed variation percentage. This range will be different when other sample rates are selected. To indicate when the ADATS are not running at normal play speed, the AI-2 will turn one of the pitch control LEDS on the front panel of the ADAT on. 7.7 GENERAL INFORMATION 7.7A Tape Header Information The AI-2 can read and save setup and cue information to the ADAT data header. When saving information the AI-2 writes to all ADAT tapes, so it will not matter which machine the tapes are put in at a future session. When reading information the AI-2 reads from the master ADAT transport, machine number one only. 7.7B Offline 66