Download Directed Electronics VIPER 9252 Technical information

VI. Camera and Lens Installation
Digital motors can be mounted to matte box support rods with either the integral motor
mounts as described in the previous section or with separate brackets.
All of the brackets have one 15mm opening for the motor rod and one 19mm opening for
a matte box rod. A step-down bushing is required for 0.625” Panavision rods or 15mm
Arri rods.
Brackets are provided in two groups: short brackets for the Panavision vertical rod
configuration and long brackets for Arriflex style horizontal rod configurations.
Panavision Vertical Matte Box Rods
Arriflex Horizontal Matte Box Rods
VII. Battery Packs and Charger
The HU3 uses FM-50 type LI-Ion Battery Packs. The batteries have a rating of 7.4v @ 1.5 ~
1.8 AH. They provide a typical run time of 6 hours. The typical charging time is 4 hours.
FM -50 Battery p/n 4025
Charger p/n 4027
22