Download Directed Electronics RSIII Installation guide

ORANGE (+) Accessory Output
Connect this wire to the accessory wire in the vehicle that powers the climate control system.
PURPLE (+) Starter Output
Connect this wire to the starter wire in the vehicle.
NOTE: If failsafe starter kill is installed, be sure the PURPLE wire is connected to the car side of
the failsafe starter kill relay.
PINK/WHITE (+) Output to Second Ignition Circuit
Connect this wire to the second ignition wire in the vehicle.
NOTE: For vehicles that do not have a second ignition wire, this connection is not required.
Remote Start Ribbon Harness Wiring Diagram
1
___
PURPLE
(-) 200 mA Starter Relay Turn-On
2
___ ORANGE
(-) 200 mA Accessory Relay Turn-On
3
___ PINK
(-) 200 mA Ignition Relay Turn-On
4
___
(+) Ignition Input to Remote Start
5
___ RED
YELLOW
(+) Constant Power
Remote Start Harness (H3),
Wire Connection Guide
Remote Start Harness (H3) Wiring Diagram
©
1
___ BLUE
(-) Status/Factory Security Rearm Output
2
___ BLUE/BLACK
(-) 200 mA Optional Third Ignition Output
3
___ GRAY
4
___ BROWN
5
___ VIOLET/WHITE
Tachometer Input Wire
6
___ BLACK/WHITE
(-) Neutral Safety Switch Input
2003 Directed Electronics, Inc.
(-) Hood Pinswitch Shutdown Wire
(+) Brake Switch Shutdown Wire
15