Download CDA MV440 Operating instructions

© Siemens AG 2013
Code reading systems
Introduction
Code Reading Systems
Verification systems
Optical character recognition
By using verification systems, the readability of marks is guaranteed throughout the entire production process, regardless of any
possible contamination or when using different readers. Moreover, the marking can continue to be read after the production
process throughout the lifespan of the product.
With the "Text Genius" OCR license, SIMATIC MV440 can also be
used for optical character recognition (OCR) in addition to reading 1D bar codes and 2D matrix codes. It is also possible to read
and compare plain text and machine-readable code in the same
image field.
In addition to reading 1D bar codes and 2D matrix codes,
SIMATIC MV440 can be expanded at any time with verification
functionality using the "Veri-Genius" verification license. The
license is supplied as a "Single License" on a USB stick and can
be copied to the SIMATIC MV440 with the SIMATIC Automation
License Manager (ALM) using a plug-in. The license is executable on any SIMATIC MV440 as of firmware version 4.0.
The license is supplied as a "Single License" on a USB stick and
can be copied to the device with the SIMATIC Automation
License Manager (ALM) using a plug-in. The license runs on every SIMATIC MV440, firmware version 3.0 or higher.
Object recognition
5
With the "Pat Genius" object recognition license, SIMATIC MV440
can also be used for object recognition (object classification,
position detection, counting, etc.) in addition to reading 1D bar
codes and 2D matrix codes. In addition, the functionality is possible in combination with text recognition, for example, thus enabling position control of a label and control of the labeling
(reading and comparison) of plain text in an image field.
The license is supplied as a "Single License" on a USB stick and
can be copied to the device with the SIMATIC Automation
License Manager (ALM) using a plug-in. The license runs on every SIMATIC MV440.
5/4
Siemens ID 10 · 2014