Download Canon EOS-3 Troubleshooting guide

Transcript
Setting Exposure Compensation
CF
Custom Function CF-6 enables the exposure compensation amount to be set in
half-stop increments. See page 112.
• The exposure compensation amount’s 1/3-stop or half-stop (enabled with Custom
Function CF-6) increments are indicated in the viewfinder and on the LCD panel
as shown below.
• The exposure compensation amount remains effective even after the < > switch
is set to < >.
–1 1/2 exposure compensation
–1 1/3 exposure compensation
Exposure Compensation with the <
> Button
Exposure compensation can also be set with the <
dial.
> button and <
>
Press the < > button and turn the
<
> dial within ( 6 ) to set the
desired exposure compensation
amount.
• This is useful when you want to
apply
the
same
exposure
compensation to the entire roll of
film.
• To prevent the < > dial from
turning inadvertently and changing
the exposure compensation amount,
set the < > switch to < >.
76