Download Canon EOS-3 Troubleshooting guide
Transcript
Setting Exposure Compensation CF Custom Function CF-6 enables the exposure compensation amount to be set in half-stop increments. See page 112. • The exposure compensation amount’s 1/3-stop or half-stop (enabled with Custom Function CF-6) increments are indicated in the viewfinder and on the LCD panel as shown below. • The exposure compensation amount remains effective even after the < > switch is set to < >. –1 1/2 exposure compensation –1 1/3 exposure compensation Exposure Compensation with the < > Button Exposure compensation can also be set with the < dial. > button and < > Press the < > button and turn the < > dial within ( 6 ) to set the desired exposure compensation amount. • This is useful when you want to apply the same exposure compensation to the entire roll of film. • To prevent the < > dial from turning inadvertently and changing the exposure compensation amount, set the < > switch to < >. 76