Download DCA Intertel 2000 Technical information

4.2.9 PAPER FEED
LF
Format:
ASCII:
decimal:
hexadecimal:
Line Feed
LF
10
OA
Comment:
All data in the input buffer are printed and the sheet advances by one line. The length
of the actual fed paper is equal to the set line spacing.
ESC J n
Format:
ASCII:
decimal:
hexadecimal:
Advance sheet by n/216 inch
27
1B
ESC
74
4A
J
n
n
n
Comment:
Paper advances by n/216 of an inch (1/216” = 0.118mm).
The range for “n” should be from 0 to 255 (OOhex...FFhex).
This command does not move the carriage to the beginning of the next line nor does
it affect subsequent lines: it can be seen as a means to obtain an immediate fractional
line feed with no carriage return for specific paper positioning purposes. If a permanent fractional line spacing is required, command ESC 3 n should be used (see further
on).
ESC 0
Format:
ASCII:
decimal:
hexadecimal:
Set line spacing to 1/8 inch
ESC
27
1B
0
48
30
Comment:
Line spacing is set to 1/8 of an inch (3.175 mm) for subsequent line feed commands.
It should be noted that value “zero” in the command sequence is the ASCII code zero.
(code 48 dec.)
ESC 1
Format:
ASCII:
decimal:
hexadecimal:
Set line spacing to 7/72 inch
ESC
27
1B
1
49
31
Comment:
Line spacing is set to 7/72 of an inch (2.47 mm) for subsequent line feed commands.
DCA Intertel
25
DCA Intertel