Download Axis 7000/FX User`s manual

The Parameter List 113
AXIS 7000/FX User’s Manual
Parameter name
Value
Description
PrimaryDNS
= 0.0.0.0
SecondaryDNS
= 0.0.0.0
NTPServer
=0.0.0.0
ProtectIP
=Off
Specifies the IP address of the primary DNS
server. Used e.g. for setting up of destinations
with names instead of IP addresses.
Specifies the IP address of the secondary DNS
server, should the primary be unavailable or
disconnected.
Specifies the name or IP address of the NTP
server used for time synchronization.
If enabled, the IP address cannot be changed
from the control panel using the Menu button
[HTTP]
ExternalLink
=www.company.name
ExternalImage
=
[SNMP]
GetCommunityName
= public
TrapDestination
= 0.0.0.0
TrapCommunityName
= public
SystemContact
=
SystemName
=
SystemLocation
=
AuthenticationTrap
= disabled
[Clients]
Specifies the URL to a customized link, e.g. to
your company’s web site. The link will be
available from the AXIS 7000/FX Web browser
interface.
Specifies the URL to the image that will indicate
the customized external link.
Specifies the community that has read only
access to all supported SNMP objects except
WriteCommunity, SupervisorPassword and
ftpPassword. It corresponds to the
ReadCommunity SNMP object.
Specifies the IP Address which SNMP traps are
sent to. It corresponds to the TrapAddress SNMP
object. Default is 0.0.0.0, which means that all
SNMP traps are disabled.
Specifies the community for all generated SNMP
traps. It corresponds to the TrapCommunity
SNMP object.
Optional entry which should be in plain text and
may be used to show the name of the system
contact person.
Optional entry which should be in plain text and
may be used to show the name of the system.
Optional entry which should be in plain text and
may be used to show the location of the system.
Enables or disables the SNMP authentication
failure traps. It corresponds to the
snmpenableAuthenTraps (MIB-II) SNMP object.