Download Brocade Communications Systems ServerIron ADX 12.4.00a Technical data

2
High availability designs with TCS
ServerIronADX(config)# interface ve 2
ServerIronADX(config-ve-2)# ip address 10.10.10.1 255.255.255.0
ServerIronADX(config-ve-2)# ip vrrp-extended vrid 2
ServerIronADX(config-ve-2-vrid-2)# backup
ServerIronADX(config-ve-2-vrid-2)# ip-address 10.10.10.10
ServerIronADX(config-ve-2-vrid-2)# track-port ve 1
ServerIronADX(config-ve-2-vrid-2)# track-port ve 3
ServerIronADX(config-ve-2-vrid-2)# enable
ServerIronADX(config)# interface ve 3
ServerIronADX(config-ve-3)# ip address 3.3.3.1 255.255.255.0
ServerIronADX(config-ve-3)# ip vrrp-extended vrid 3
ServerIronADX(config-ve-3-vrid-3)# backup
ServerIronADX(config-ve-3-vrid-3)# ip-address 3.3.3.10
ServerIronADX(config-ve-3-vrid-3)# track-port ve 1
ServerIronADX(config-ve-3-vrid-3)# track-port ve 2
ServerIronADX(config-ve-3-vrid-3)# enable
ServerIronADX(config)# server cache-name cache3 3.3.3.22
ServerIronADX(config-rs-cache2)# port mms
ServerIronADX(config-rs-cache2)# port rtsp
ServerIronADX(config-rs-cache2)# port pnm
ServerIronADX(config-rs-cache2)# port http
ServerIronADX(config-rs-cache2)# port http url "HEAD /"
ServerIronADX(config)# server cache-group 1
ServerIronADX(config-tc-1)# prefer-router-cnt 0
ServerIronADX(config-tc-1)# cache-name cache2
ServerIronADX(config-tc-1)# no http-cache-control
ServerIronADX(config-tc-1)# exit
ServerIronADX(config)# ip l4-policy 1 cache tcp 0 global
ServerIronADX(config)# ip l4-policy 2 cache udp 0 global
ServerIronADX(config)# ip l4-policy 3 cache tcp mms global
ServerIronADX(config)# ip l4-policy 4 cache tcp rtsp global
ServerIronADX(config)# ip l4-policy 5 cache tcp pnm global
ServerIronADX(config)# ip l4-policy 6 cache tcp http global
ServerIronADX(config)# ip route 195.92.20.0 255.255.255.0 10.10.20.2
ServerIronADX(config)# ip route 195.92.10.0 255.255.255.0 10.10.10.2
ServerIronADX(config)# router vrrp-extended
ServerIronADX(config)# server active-active-port ethe 1/16 vlan-id 16
ServerIronADX(config)# server force-delete
ServerIronADX(config)# no server l4-check
Commands for ServerIron ADX B
The following commands configure ServerIron ADX B in Figure 27.
NOTE
This example shows commands that are valid on the ServerIron ADX device only when it is running
the Layer 3 router image.
ServerIronADX(config)# vlan 1 name DEFAULT-VLAN by port
ServerIronADX(config-vlan-1)# exit
ServerIronADX(config)# vlan 100 by port
ServerIronADX(config-vlan-100)# untagged ethe 1/1 to 1/4
ServerIronADX(config-vlan-100)# router-interface ve 1
ServerIronADX(config-vlan-100)# exit
ServerIronADX(config)# vlan 200 by port
ServerIronADX(config-vlan-200)# untagged ethe 1/5 to 1/7
ServerIronADX(config-vlan-200)# router-interface ve 2
ServerIronADX(config-vlan-200)# exit
110
ServerIron ADX Advanced Server Load Balancing Guide
53-1002435-03