1
Download Cisco 2950G 24 - Catalyst Switch Specifications
Transcript
Chapter 2 Cisco IOS Commands mvr immediate mvr immediate Use the mvr immediate interface configuration command to enable the Immediate-Leave feature on an interface. Use the no form of this command to disable the feature on the interface. mvr immediate no mvr immediate Syntax Description This command has no keywords or arguments. Defaults The Immediate-Leave feature is disabled. Command Modes Interface configuration Command History Release Modification 12.1(6)EA2 This command was first introduced. Usage Guidelines The Immediate-Leave feature applies only to receiver ports. When the Immediate-Leave feature is enabled, a receiver port leaves a multicast group more quickly. When the switch receives an Internet Group Management Protocol (IGMP) leave message from a group on a receiver port, it sends an IGMP query on that port and waits for IGMP group membership reports. If no reports are received in a configured time period, the receiver port is removed from multicast group membership. With the Immediate-Leave feature, an IGMP query is not sent from the receiver port on which the IGMP leave was received. As soon as the leave message is received, the receiver port is removed from multicast group membership, thus speeding up leave latency. The Immediate-Leave feature should only be enabled on receiver ports to which a single receiver device is connected. Examples This example shows how to enable the Immediate-Leave feature on a port: Switch(config-if)# mvr immediate This example shows how to disable the Immediate-Leave feature on a port: Switch(config-if)# no mvr immediate You can verify your settings by entering the show mvr privileged EXEC command. Catalyst 2950 and Catalyst 2955 Switch Command Reference 78-15304-01 2-119
