Download Cisco 7609 Specifications

Transcript
Contents
Configuring EtherChannels 13-6
Configuring Port Channel Logical Interfaces for Layer 3 EtherChannels
Configuring Channel Groups 13-8
Configuring the LACP System Priority and System ID 13-10
Configuring EtherChannel Load Balancing 13-11
CHAPTER
14
Configuring IEEE 802.1Q Tunneling and Layer 2 Protocol Tunneling
Understanding How 802.1Q Tunneling Works
14-1
14-1
802.1Q Tunneling Configuration Guidelines and Restrictions
Restrictions 14-3
Guidelines 14-4
14-3
Configuring 802.1Q Tunneling 14-5
Preconfiguration Tasks 14-5
Configuring 802.1Q Tunnel Ports 14-6
Configuring the Cisco 7600 Series Router to Tag Native VLAN Traffic
Understanding How Layer 2 Protocol Tunneling Works
Configuring Support for Layer 2 Protocol Tunneling
CHAPTER
15
Configuring STP and IEEE 802.1s MST
13-7
14-6
14-7
14-8
15-1
Understanding How STP Works 15-2
STP Overview 15-2
Understanding the Bridge ID 15-3
Understanding Bridge Protocol Data Units 15-4
Election of the Root Bridge 15-4
STP Protocol Timers 15-5
Creating the Spanning Tree Topology 15-5
STP Port States 15-6
STP and IEEE 802.1Q Trunks 15-12
Understanding How IEEE 802.1w RSTP Works
IEEE 802.1w RSTP Overview 15-13
RSTP Port Roles 15-13
RSTP Port States 15-14
Rapid-PVST 15-14
Understanding How IEEE 802.1s MST Works
IEEE 802.1s MST Overview 15-15
MST-to-PVST Interoperability 15-16
Common Spanning Tree 15-18
MST Instances 15-18
MST Configuration Parameters 15-18
15-13
15-14
Cisco 7600 Series Router Cisco IOS Software Configuration Guide—12.1E
viii
78-14064-04