Download Aircel DHT-40 Specifications

Transcript
High Inlet Temperature Refrigerated Air Dryer
Refrigerant Safety Precautions
Refrigerant First Aid Recommendations
CAUTION!
Inhalation, Skin, & Eye Irritant
• Use proper safety and protective equipment, including chemical safety goggles or face shield and impervious gloves when handling refrigerants.
• Exercise care to ensure that liquid refrigerant does not come in contact with your skin or eyes.
• DO NOT SMOKE.
• Ventilation in work area must be adequate to keep the concentration of refrigerant below 1,000 ppm.
• System must be free of all refrigerant before any welding or brazing can be performed and must be done in a well ventilated area.
•
Decomposition of refrigerants is hazardous! This material can be decomposed by high temperatures caused by an open flame. Hydrofluoric acid and possibly carbonyl fluoride can form in a liquid or gaseous state. Avoid exposure to these toxic fumes and irritating materials.
•
Leave the work area immediately if you experience any of the following: smell something unusual, feel light-
headed, experience shortness of breath, feel a tingling sensation in your fingers or toes, suddenly feel warm or a rapid heartbeat.
Inhalation
If high concentrations are inhaled, immediately
remove individual from affected area to an area
with a fresh air supply. Keep individual calm.
If not breathing, give artificial respiration or if
having difficulty breathing, give oxygen and call for
emergency services.
Skin Contact
In case of contact with the skin, immediately flush
skin with clean water for at least 15 minutes. Treat
for frostbite if necessary by gently warming affected
areas and call for emergency services. Remove any
contaminated clothing or shoes.
Eye Contact
In case of contact with the eyes, immediately flush
eye(s) with clean water for at least 15 minutes and
call for emergency services.
5