Download SBE HighWire HW400c/2 Specifications

DPR_BUS_CLOCK. Selects a T8102 clock source to drive the local bus.
The putmsg control buffer is a structure of type dpr_usel_t with the usel_val
element specifying the clocking source. The getmsg control buffer returned is
also a dpr_usel_t structure with the error code in the usel_err element, which
is zero on success. The allowed clock source values are:
T8100_CT_BUS_NO_CLK
Do not drive the local bus clock.
T8100_CT_BUS_CLK_A
Clock A to drive the local bus.
T8100_CT_BUS_CLK_B
Clock B to drive the local bus.
T8100_CT_BUS_CLK_AB
Clock A and B to drive the local bus.
DPR_BUS_NETREF. Sets the source for the NETREF signal.
The putmsg control buffer is a structure of type dpr_usel_t with the usel_val
element containing the source setting using the macro SET_NETREF (assign,
source). The getmsg control buffer returned is also a dpr_usel_t structure with
the error code in the usel_err element, which is zero on success. The
NETREFs that can be assigned are:
106
Data Path Routing (DPR)
T8100_CT_BUS_NO_NETREF
No NETREF assigned to CT Bus.
T8100_CT_BUS_NETREF_1
NETREF1 assigned to CT Bus.
T8100_CT_BUS_NETREF_2
NETREF2 assigned to CT Bus.
T8100_CT_BUS_NETREF_12
Both NETREF1 and NETREF2 assigned to
CT Bus.
HighWire MTP-2 - 1.2, September 4, 2002