Download Matrix Amplification CFR 12 User guide
Transcript
Contents Prepare the sample lysate (heat protocol) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Prepare the reactions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Store the sample lysate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Perform PCR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 ■ CHAPTER 3 Perform Electrophoresis . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 Allelic ladder requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Section 3.1 3500/3500xL instruments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 Set up the 3500/3500xL instruments for electrophoresis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reagents and parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Electrophoresis software setup and reference documents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Obtain and run the HID Updater . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Perform spectral calibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 31 31 32 32 Prepare samples for electrophoresis on the 3500/3500xL instruments . . . . . . . . . . . . . . . . . . . . . . 33 Section 3.2 3130/3130xl instruments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 Set up the 3130/3130xl instruments for electrophoresis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reagents and parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Electrophoresis software setup and reference documents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Obtain and activate the 6-dye license for the instrument . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Perform spectral calibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 35 35 35 37 Prepare samples for electrophoresis on the 3130/3130xl instruments . . . . . . . . . . . . . . . . . . . . . . . 37 Section 3.3 3730 instrument . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 Set Up the 3730 instrument for electrophoresis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reagents and parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Electrophoresis software setup and reference documents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Obtain and activate the 6-dye license for the instrument . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Perform spectral calibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 39 39 39 41 Prepare samples for electrophoresis on the 3730 instrument . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 ■ CHAPTER 4 6 Analyze Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 Overview of GeneMapper® ID-X Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Instruments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Before you start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . New features to support GlobalFiler™ Express Kit data analysis . . . . . . . . . . . . . . . . . . . . . . . . 43 43 43 44 Set up GeneMapper® ID-X Software for data analysis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Panel, bin, and stutter file version . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Before using the software for the first time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Check panel, bin, and stutter file version . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Import panels, bins, and marker stutter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Create an analysis method . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . General tab settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Allele tab settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 46 46 46 47 51 52 53 Globalfiler™ Express PCR Amplification Kit User Guide