Download Sharp R-933S Product data

6
INSTALLATION
The cooker affords class “1” protection against overheating of surrounding surfaces.
The installation conditions, concerning protection against overheating of the surfaces adjacent to the cooker, must conform to Figs. 6.1 and 6.2.
A space of at least 2 cm must be left between the cooker and any adjacent furniture, which
must not exceed the height of the cooktop.
If the cooker is installed adjacent to furniture which is higher than the gas hob cooktop, a
gap of at least 30 cm must be left between the side of the cooker and the furniture.
The veneered syntetical material and the glue used must be resistant to a temperature of
90°C in order to avoid ungluing or deformations.
Curtains must not be fitted immediatly behind appliance or within 500 mm of the sides.
If the cooker is located on a pedestal it is necessary to provide safety measures to prevent
falling out.
The appliance must be housed in heat resistant units.
The walls of the units must not be higher than work top and must be capable of resisting temperatures of 75 °C above room temperature.
Do not instal the appliance near inflammable materials (eg. curtains).
■■
Class 1
450 mm
650 mm
Gas connection made cm
using
0
rubber hose which 5must be
visible and easily inspected
or using rigid or flexible metal
pipe.
500 mm
300 mm
50
cm
m
20 m
m
20 m
Fig. 6.1
Fig. 6.2
17