Download SATO LM408e Technical data

Transcript
Unit 4: Printer Configuration
PROTOCOL INITIALIZATION MODE
Allows non-standard protocol code to be returned to the default value. The default value is: STX (7BH), ETX (7DH),
ESC (5EH), ENQ (40H), NULL (7EH), CAN (21H), Offline (5DH), EuroCode (D5H).
Use the keys of the printer’s operator panel to select and enter the required options. Refer to the Menu Definition
Tables in the following chapter to provide an explanation of each menu screen.
DSW7: ON
LINE + FEED + POWER
ALT. PROTOCOL
DEFAULT COMPLETE
Protocol
code is
initialized
Power printer off,
reset DSW7 to exit
Figure 4-8, Protocol Initialization Mode
LM408-412e Operator Manual
4-11
PN: 9001155A