Download Beisler 68 Operating instructions
Transcript
4.2 Working method “Breast welt pocket” Processing patterned or plain-coloured fabrics When processing plain-coloured fabrics it is not necessary to align men’s jacket fronts and breast welts as per pattern. Thus, plain-coloured fabrics can be processed more quickly. - Align positioning aids Feeding method Example: Men’s jacket front with breast welt pocket, patterned fabric 1st step: – Select pocket program No. 7 at the control panel. – Position breast welt 1 on the jacket front as per the stripes. – Align the breast welt of the jacket front at the laser markings 2 and 3 (right and bias laser). – Step on the start pedal. The vacuum is switched on. The jacket front is sucked. 2nd step: – Remove breast welt 1. – Position pocket bag 4 at the left laser. – Step on the central pedal. The fabric clamps move to the front. The right clamp 6 clamps the jacket front. The left clamp 7 remains pressureless. 3rd step: – Position breast welt 8 at the stop of the left fabric clamp (at the front laser). – Fold back seam allowance 10 at the clamp and check the course of the pattern in longitudinal direction. Correct the course of the pattern by slightly pulling the jacket front or by shifting the flap clamp 9. – Step on the central pedal. Pressure is applied on the left fabric clamp 7. – Actuate the central pedal. The folder lowers. – Actuate the central pedal once again. The sewing process starts. 20