Download Axis 5600plus User guide

System Information
Figure 1-2
Left side view (Continued)
Item Description
For more information...
7
Gas 1 and Gas 2 (zero) supply connection Contact an AB SCIEX FSE.
8
Source exhaust gas (zero air or nitrogen)
supply connection
Contact an AB SCIEX FSE.
9
CAD gas (nitrogen) supply connection
Contact an AB SCIEX FSE.
10
Source exhaust waste connection
Contact an AB SCIEX FSE.
11
Roughing pump vacuum connection
Contact an AB SCIEX FSE.
12
AC distribution panel
Contact an AB SCIEX FSE.
13
Instrument power switch
Refer to Start Up the System on page 20.
14
Cover over circuit breaker
Refer to Start Up the System on page 20.
Use the power switch rather than the
circuit breaker to shut down the system.
15
Mains supply cable
Refer to Start Up the System on page 20.
Dress Panel LEDs
Table 1-1 Dress Panel LEDs
Instrument LED
Color
Name
Description
Green
Power
Lit when the mass spectrometer is turned on.
Green
Vacuum Lit when the proper vacuum has been achieved;
and flashing if the system is not at the proper
vacuum level (during pumpdown and venting.)
Red
Fault
Green
Syringe
Pump
Status
Lit when the mass spectrometer encounters a
system fault.
Lit when the syringe pump is running.
Start Up the System
Note: Before operating the instrument, read the safety information in the Safety and
Regulatory Information.
Before the system is turned on, make sure the site requirements specified in the Site Planning
Guide are met. This guide includes information on the mains supply and connections, source
exhaust, compressed air, nitrogen, roughing pump, ventilation, exhaust, and site clearance.
AB SCIEX TripleTOF® 5600/5600+ Instruments
20 of 116
System User Guide
D5033331 A