Download Allied Telesis AT-ANC10S/4 Installation guide

AT-ANC10S/2 and AT-ANC10S/4 Adapters Installation Guide
SELECT * FROM __InstanceDeletionEvent
where TargetInstance ISA "BRCM_NetworkAdapter"
SELECT * FROM __InstanceCreationEvent
where TargetInstance ISA "BRCM_ActsAsSpare"
SELECT * FROM __InstanceDeletionEvent
where TargetInstance ISA "BRCM_ActsAsSpare"
For detailed information about these events, see the CIM documentation
at:
www.dmtf.org/sites/default/files/standards/documents/
DSP0004V2.3_final.pdf
Loading the CIM
Libraries
By default, the Broadcom Advanced Control Suite utility does not load the
CIM libraries. You need to select this option.
To load the CIM libraries on your PC, do the following:
1. Download the BACS utility from the Allied Telesis website.
This utility is available from the www.alliedtelesis.com/support/
software website. After accessing the website, enter the model
number in the Search by Product Name box and click Find to view
the current list of available files.
2. Download BACS onto your PC.
3. On your PC, open the InstallShield.
Within the BACS utility, there is an option to load the CIM libraries. The
BACS CIM Option Window is displayed. See Figure 21 on page 84.
83